1. For the Award BIOS, it will detect floppy disk while system boot up.
If there is no floppy disk on the system, it will show warning message in POST screen.
You can press Delete key in POST screen, then go to CMOS> Standard CMOS Features> Drive A> set to None.
Save the setting for CMOS or press F10 to save it.
After system reboot, the warning message will cleared.
2. CMOS checksum error might show up when first time install CPU or clear system CMOS.
Please press Delete key to go to CMOS, then load optimized default setting for the BIOS and press F10 to save the setting.
After system reboot, the warning message will cleared.
