IDEQ 200N, 200V and 200P use VIA 8237/6420 chipset to control SATA hard drive. So it require a driver during Windows installation.Without that particular driver, the system unable to recognize the SATA HDD. During Windows 2000 and XP installation, press F6 to install third party driver. After that, insert the floppy disk which contain the SATA driver. The installation process will continue after the system able to detect the SATA HDD.
VIA SATA RAID driver under the following directory in the driver CD.
x:\Driver\SATA\VT6420\DriverDisk\SATA
Please copy all of the files and folders into a floppy disk, then Windows will be able to recognize the driver. Or you can unzip the driver to a floppy disk from following link.
https://download.biostar.com.tw/upload/Driver/Chipset/VIA/SATA/Disk/RAID/drvdisk.exe
