If your system does not have screen output after over-clock. This might be caused by the CPU!|s Front-Side -Bus (FSB) over the chipset!|s limitation. You can restore the BIOS default setting by clear the CMOS setting. Once the CMOS goes back to default setting, the System will able to boot-up properly. Following show the procedure how to Clear the CMOS Setting: 1. Turn off the system and remove AC power cord from the power supply. 2. Set JCMOS1 to Pin 2-3. 3. Wait for 10 seconds. 4. Set JCMOS1 back to Pin 1-2. 5. Connect AC power cord back to power supply and power on the system.
You can easily access our extensive FAQ section, which is designed to swiftly address common queries and promptly resolve any issues you might encounter.
