Clear CMOS to make sure if the computer can boot up, please follow the step below.
1. Remove AC power line.
2. Set the jumper to “Pin 1-2 short”, you can use a metal object like a screwdriver to touch the
two pins.
3. Wait for five seconds.
4. After clearing the CMOS values, be sure the jumper is “Pin 1-2 open”.
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS
(Please refer user manual by different model to clear CMOS )
if you still have problems, please contact us via E-support
