To install NVIDIA RAID technology on a new Windows XP operating system, a floppy disk with the NVIDIA IDE drivers must be created to enable installation of NVIDIA RAID
To create the NVIDIA IDE drivers floppy disk, the end user must
1. Copy these files from the NVIDIA nForce?driver directory (IDE/WinXP or
Win2K) onto a formatted floppy disk
Txtsetup.oem
Nvraid.sys
NvAtaBus.sys
NVRAID driver download
2. Go into the BIOS setup menu and enable RAID
a. In the BIOS menu, specify which disks should be dedicated to RAID
b. Exit the BIOS menu and reboot
3. At the RAID ROM screen, press F10 to enter RAID setup
a. Create a RAID array and add disks to it
b. Select "Yes" when asked to clear disk data
c. Reboot system
4. Select F6 when prompted
5. Install the NVIDIA RAID drivers created on the floppy disk
Select both the RAID and IDE drivers from the floppy to enable RAID functionality
6. Continue with the driver installation process
You can easily access our extensive FAQ section, which is designed to swiftly address common queries and promptly resolve any issues you might encounter.
