Biostar Support :: IPC Manufacturing, Industrial PC Motherboard Manufacturers

Back

Home
Support
FAQ

FAQ

You can easily access our extensive FAQ section, which is designed to swiftly address common queries and promptly resolve any issues you might encounter.

All HOT 20

Questions

My motherboard doest not boot up, how to check it?

Please follow these suggestion to check if motherboard cannot boot up properly.

1. Check 24 pin and 4 pin power cable connect properly on motherboard.

2. Clear CMOS for the motherboard to restore BIOS setting.

3. Insert VGA card. Some of CPU might not have build-in VGA support, so it might need VGA card to let system POST properly.

4. Remove and insert CPU to make CPU socket contact better. Check if CPU is listed in CPU support form from Biostar website.

5. Do not use memory module with different brand and speed mixed up. Change memory module see if it's memory support problem.

If non of the suggestion above can help, please contact local dealer or computer shop for a check up.

Why cannot install Windows 7 under AHCI mode for Hi-Fi B85S3?

This problem could cause by DVD driver too old. Please update DVD drive's firmware to latest version or change a new DVD drive to support AHCI mode to install Windows 7.

Why TA75MH2 board uses AMD Athlon X4 750K CPU, CPU temperature will get very hot under BIOS setup screen?

AMD Athlon X4 750 CPU is 100 watt, also CPU will running at full speed under BIOS setup screen.

So CPU temperature might get hot if use CPU cooler not design for support 100 watt CPU.

We suggest to use copper base CPU cooler if use Athlon X4 750K CPU on TA75MH2 motherboard.

Will J1800NH support Windows 7?

If there is any problem to install Windows 7, please update latest BIOS on website for J1800NH.

Also download latest driver for support Windows 7.

https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=688#dl

Why my USB mouse LED will keep light up when B75MU3B system power shut down?

Some USB mouse will keep LED light up when system power shut down, this is because motherboard will provide USB connector 5 volt stand-by power in BIOS default setting. You might enable EuP function to turn off the 5 volt stand-by power. Then USB mouse LED will not light up. Please go to BIOS> Chipset> EuP Control to set it [Enable], then save and exit the BIOS setting to let it work.

Will Hi-Fi B85N 3D support SATA Hot-swap function?

Yes, our BIOS has build-in function for enable SATA Hot-swap function. No need to adjust BIOS menu for setting it.

Why I tried to setup RAID5 but it failed when used the Hi-Fi A85S motherboard ?

Please ensure to use below mention BIOS and RAID driver version to setup RAID 5.

1. Update to new BIOS as A85AO320.BST.
=> https://download.biostar.com.tw/temp/beta/Hi-Fi_A85S_RAID5/A85AO320.rar

2. Download right RAID Driver depend on your operating system.
=> 2.1. Win7 32B/64B RAID Driver : v3.3.1540.40
==> https://download.biostar.com.tw/temp/beta/Hi-Fi_A85S_RAID5/AMD_A85_RAID_Win7_32_64_3.3.1540.40_Driver.rar
=> 2.2. Win8 32B/64B RAID Driver : v3.8.1540.14
==> https://download.biostar.com.tw/temp/beta/Hi-Fi_A85S_RAID5/AMD_A85_RAID_Windows_3_8_1540_WHQL.rar

What is the on-board VGA working frequency for NM70I-1037U motherboard?

On-board VGA working frequency for NM70I-1037U will be 350 MHz to 1000 MHz.

How to create RAID array for Hi-Fi A88S2 board?

1. Press Ctrl+R key after POST screen.

2. Selelct Delete Array in RAID ROM.

Press Insert key to select all hard drive and delete the array.

3. Select Create Array, then press Insert key to select hard drives.

4. Choose RAID array you wish to make.

Q10

Will J1800NH board support 1.5V SODIMM memory module?

Due to specification limitation, J1800NH will only support 1.35V SODIMM memory module.