Biostar

Clone view will only be able to work from single GPU. So Hi-Fi A85S3 will be able to do clone view with on-board VGA and on-board HDMI port.

With add on VGA card, it can do extension view with on-board VGA and VGA card with two GPU.

Hi-Fi B85S3E will only support mSATA function. It will not be able to support mPCIE.

Our A880GZ will support up to PCI-E v2.0 VGA cards. ASUS GTX760(DCwOC-2GB) is PCI-E v3.0 VGA card. Due to  hardware support limitation A880GZ will not be able to support this VGA card.

Our Hi-Fi A85W's on-board audio codec ALC892  does not support DTS-HD and Dolby True HD Audio Format. It's due to audio codec's support limitation for support these two audio format.

A55MD2 board uses AMD FM2 CPU, so it does not support S1 stand-by mode.

Our 7.x version motherboard also no support for S3 stand-by mode due to specification.

However, you might turn on hybernate funciton under Windows system to make it have stand-by function store in the hard drive.

The latest BIOS Z87DF802.BST will be able to fix this IRQ conflict problem.

https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=646#dl

By chipset specification for H61, it does not support RAID function. The AHCI/RAID driver on download page will only support AHCI function for H61 chipset.

TZ77XE4's SATA1 U/L and SATA4 U/L ports will support SATA3 (6.0Gb) devices.

Yes, the PS/2 port on Hi-Fi H77S will support either PS/2 keyboard or PS/2 mouse device. BIOS will detect it automatically.

NM70I-847 motherboard uses UEFI BIOS, so it will be able to support 3TB hard disk without problem.