[Note] The below update method unable to support a USB Flash drive. Only supported a Floppy Disk.
1.Download the latest BIOS file from the BIOSTAR website to a floppy disk.
2.Insert the disk that contains the newest BIOS file into the floppy drive.
3.Power ON the computer.
4.Press [DEL] key in POST screen to enter CMOS setup.
5.Select " Upgrade BIOS " item then press Enter, refer to Figure 1.
6.Press " Arrow Up/Down " key to choose BIOS file, refer to Figure 2.
7.Press [Enter] to load the BIOS from the floppy disk, refer to Figure 3.
8.At the prompt "Are you sure to flash (Y/N) ", press [Y] to flash BIOS or [N] to cancel the flashing process, refer to Figure 4.
9.After pressing [Y], the flash starts to process, refer to Figure 5.
10. A message " Flash done, Restart System (Y/N) " will appear if the system was successfully updated the BIOS, refer to Figure 6.
11.Press [Enter], then the flashing is done!
