Biostar Support :: IPC Manufacturing, Industrial PC Motherboard Manufacturers

Back

Home
Support
FAQ

FAQ

You can easily access our extensive FAQ section, which is designed to swiftly address common queries and promptly resolve any issues you might encounter.

All HOT 20

Fragens

How to set up AMD Dual Graphic (Hybrid Crossfire) on Hi-Fi A85W motherboard?

Here is the instuction for setting AMD Dual Graphic (Hybrid Crossfire) on Hi-Fi A85W.

CPU: A10 5800K / VGA card: HD 6670

Note: It will require 2G+2G or 4G+4G memory module in Dual Channel setting.for AMD Dual Graphics.

1. Insert PCI-E VGA card on motherboard then plug monitor to VGA card.

2. Boot up system and go to BIOS> Chipset>North Bridge > GFX Configuration.

Set Surround View [Enable].

Press [F4] key to save BIOS setting and reboot system.

3. Install motherboard driver and reboot system.
4. Open AMD VISION Engine Control Center> Performance> AMD Radeon Dual Graphics.
Enable AMD Radeon Dual Graphics then press [Apply] button.

5. Check Device Manager to make sure Dual Graphics is enabled.

Why I cannot OC the CPU speed to 4.0 GHz for Intel i7-3770K CPU on T77 or TP75 motherboard?

Intel has a limitation for H77 and B75 chipset for the OC ration.

The highest OC ability for these two chipsets will be able to reach Turbo Boost's value.

For i7-3770K CPU, the Turbo Boost speed will be 3.9 GHz.

So motherboard will not be able to over 3.9 GHz speed for OC setting.

How to make SSD to run at best performance on TA990FXE motherboard?

1. Complete format the SSD, do not only use quick format.

2. Use SATA AHCI mode to install Operating System. BIOS default use Native IDE mode will not enhance the best performance for SATA3 speed.

3. SSD most not use as boot disk during performance test.

Will A68I-350 DELUXE support Smartfan function?

Yes, A68I-350 DELUXE will support Smartfan function by BIOS default setting.

Why my TA75MH2 motherboard cannot use AMD A4 3420 CPU?

TA75M2H is a socket FM2 motherboard. However AMD A4 3420 is a socket FM1 CPU. Socket FM2 motherboard will not compatible with socket FM1 CPU. Please use AMD A10 3420 CPU with listed in the CPU support list on our website on TA75M2H motherboard.

Why my Nvidia GT 600 series VGA card cannot run PCI-E Gen 3.0 speed on TPower X79 motherboard?

Nvidia release a patch for GT 600 series VGA card to support Gen 3.0 speed on X79 chipset.

For detail information, please go to the link below.

http://nvidia.custhelp.com/app/answers/detail/a_id/3135/kw/600

Or download the patch file directly from this link.

nvidia.custhelp.com/ci/fattach/get/105062/0/filename/force-enable-gen3.exe

Please reboot the system after patch file installation, then the patch will start to work.

Will my G41D3+ motherboard support single side 4GB memory module?

Due to G41 chipset limitation, it will not be able to support single memory chip over 256MB.

Single side 4GB memory module is 512MB in single memory chip, so it will not be able to support by G41 chipset motherboard.

Will my motherboard be able to support SATA 3TB hard disk?

Biostar motherboard with UEFI BIOS will be able to support SATA 3TB hard disk.

Here are the list for the motherboard with UEFI BIOS.

Intel: Socket 1150/1155/2011

AMD: Socket AM3+/FM1/FM2/FM2+

How to enable the SATA 5 port for RAID array on TA970XE motherboard?

Go to BIOS SATA setting and set SATA IDE Combined Mode to "Disable". SATA 5 port will be able to support in RAID mode.

Q10

How to set up Smart Fan function on my TZ77A motherboard?

1. If you have an Intel boxed fan, then it already has built-in smartfan function. There will be no need for the Intel boxed fan.

2. Please be sure to use 4 pin CPU fan which will allow Smart Fan to control. 3 pin CPU will not be able to support for Smart Fan function.

3. After boot up, press Delete key in POST screen to go to CMOS.

Then go to Advanced> Smart Fan Control.

4. Select CPU Smart Fan to "Auto" for default Smart Fan control.

5. If need precise Smart Fan control, please select CPU Fan Calibration.

It will run a test for the CPU fan for a minute, then show out the Suggest Value for Start Value and Sensitive. Type in these two values then press F4 key to save the BIOS setting. Smart Fan will work at best setting for the system.