Biostar

For creating RAID 0 array, it will require two hard disks with same disk size to double the RAID 0 total space.

If use two different hard disk with different size, RAID 0 will only be able to double the space of smallest size hard disk.

For this case, if use 500GB and 1TB HDD at same time.

The RAID 0 disk space will be 500GB x2, which is close to 1TB size.

TH67+ motherboard will support Hyper-V function. CPU also need to support Hyper-V function for proper support.

Yes, any of two display port on motherboard will be able to support dual monitor function for TH67XE motherboard.

Following configurations will support for dual monitor display.

VGA+DVI / VGA+HDMI / VGA+ Display Port

DVI+HDMI / DVI+ Display Port / HDMI+Display Port

TZ77XE4 will be able to support DDR3-2400 memory speed when use Intel Ive Bridge CPU.

Intel Sandy Bridge CPU will support up to DDR3-2133 speed due to it's hardware support limitation.

Due to Intel H61 chipset specification, it will only support AHCI function.

H67/P67/Z68 chipsets will be able to support RAID 0/1/5/10 functions.

Due to AMD specification, AM3+ CPU insert more than two double side memory module, memory speed will run DDR3-1333 by BIOS default setting.

It need to manually set in BIOS for support DDR3-1600 speed.

Please refer following pictures for the setting.

1. Press [Delete] key in POST screen to go to BIOS > O.N.E > OverClock Navigator > Manual OverClock.

2. Go to DRAM TIMING Configuration > MCT Timing Mode > Manual.

3. Memclock Value > DDR 1600.

4. Press F4 key to Save and Exit the BIOS.

Yes, all of our H61/H67/P67/Z68 motherboard will be able to support latest Intel IvyBridge CPU.

Please check if your motherboard running with latest BIOS and driver from website.

To update BIOS, use Sandy Bridge CPU to update, then swap to Ivy Bridge CPU after BIOS update complete.

Also need to download latest VGA driver to support Ivy Bridge's on-board VGA core.

Here are the download links for on-board VGA driver for H61/H67/Z68 chipset motherboards.

XP x64

https://download.biostar.com.tw/upload/Driver//Chipset/Intel/VGA/T/IVYbridge/XP/6.14.10.5407/xp64.exe

XP x86 / MCE

7 x86 / Vista x86

https://download.biostar.com.tw/upload/Driver//Chipset/Intel/VGA/T/IVYbridge/W7VISTA/8.15.10.2712/WinVista7.exe

7 x64 / Vista x64

https://download.biostar.com.tw/upload/Driver//Chipset/Intel/VGA/T/IVYbridge/W7VISTA/8.15.10.2712/WinVista7_64.exe

Note: P67 does not have on-board VGA display, so there is no need to install on-board VGA driver.

Yes, TH67+ motherboard will be able to support HDMI and DVI for dual screen at same time.

At this condition, HDMI output will work under Windows due to Intel spec limitation.

1. Press [Delete] key to go CMOS> O.N.E.

2. Set OverClock Navigator to Manual OverClock.

3. Go to DRAM Timing Configuration

4. Set MCT Timing Mode to Manual

5. Set Memclock Value to DDR-1600

6. Press F4 to save and exit BIOS.

Please update our latest BIOS on website and it will fix the CPU detect problem.

Here is the link for BIOS download page.

https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=472&tab=2