Biostar

Please install a jumper cap on pins 5 and 6. It will enable HDD SATA 150MB/s only operation. Then the HDD will be detected by VIA 8237/8237R southbridge motherboards. Also please refer the following website link for detail information. Western Digital website link.

The PFWRP(Phoenix FirstWare Recover Pro) is required to keep a free partition In HDD before install it. That mean we needs to reserve some free partition on the HDD. The PFWRP will create the partition on the reserve area during the installation. For example, If we had 80G HDD and would like to seperate It into two partition. We can format the HDD into two partition 30G and 30G as C: and D: respectively. Therefore, the PFWRP will format the other 20G during the installation.

Users can download the latest Intel Giga LAN driver for P4TCA Pro on Intel website. http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1068 Driver link

iDEQ300G, 330G, and 330P require F6 disk to install Windows OS in RAID array. Biostar motherboard supports USB device boot function. Users can use either USB floppy drive or USB flash sticks(supports floppy mode) to replace standard 3.5 inch floppy driver for F6 disk installation. Just copy the RAID driver files into USB flash disk, then system will be able to recognize it during Windows installation.

330G, 300G, 330P, 210P, 220T and 200T system support SATA 2 interface HDDs.

Open the NVIDIA Web-based Interface from the link on desktop.
Or open the utility from Start > Programs > NVIDIA Corp > Network Access Manager > Web-based Interface.
Then follow the steps on the attached picture for setup.

Please follow the tables to install DDR memory module. Otherwise, system may not boot up or running properly. AMD recommend use paired DDR memories (same size and speed) for running at 128bit memory bandwidth. !§SS!‥ represents Single Side DDR memory module. !§DS!‥ represents Double Side DDR memory module. !§NA!‥ represents Not Available. !§*!‥ (Star sign) represents leave the DIMM socket empty.

P4VMAM, P4VTG-M, M7VIT800, M7NCD Ultra, M7VIZ v8.x need to use F6 disk to install Windows system into SATA hard disk.

1. Copy all the files under following directory to a 1.44 floppy disk. D:\DRIVER\SerATA\VT6420\DriverDisk 2. At the first Blue Screen prompt "Press F6 to install 3rd Party RAID Controller Software" Follow the instructions. Windows will detect the driver disc in the floppy drive and install the VIA driver. 3. Windows will detect SATA hard disk after driver loaded, then continue installation.

No. Currently, VIA 8237 and 6420 SATA chipset only supports SATA 1 interface hard disks.